Internet in the Sky!

 "Internet in the sky" refers to the satellite internet networks that provide global, high-speed broadband from space. Unlike traditional satellite internet, which relies on a few massive spacecraft far from Earth, modern "mega-constellations" like SpaceX's Starlink, Eutelsat OneWeb, and Amazon's Project Kuiper utilize thousands of smaller satellites operating in Low Earth Orbit (LEO) (about 300 to 1,200 kilometers up).


  • The Connected Mesh: Because they are situated much closer to Earth, the time it takes for data to travel back and forth (latency) is dramatically reduced, offering a highly responsive, low-latency connection comparable to terrestrial fiber-optic networks. To maintain continuous global coverage, these satellites are constantly in motion, communicating with each other using advanced inter-satellite "space lasers" (optical inter-satellite links) to create an interconnected data mesh around the entire planet.

  • Universal Reach: On the ground, users, airplanes, and ships connect to this "internet in the sky" using phased-array antennas, which can electronically track multiple satellites moving rapidly overhead without any moving parts. This has revolutionized connectivity for remote, off-grid communities, maritime vessels, and commercial aviation, bringing high-speed data to the most isolated corners of the globe.

Comments

Post a Comment

Popular posts from this blog

What is SSDV? No, it is not a typo!

Image
This week, every amateur radio satellite enthusiast is busy decoding and posting SSTV (Slow Scan TV) images from International Space Station. Now what is SSDV? SSDV is the abbreviation for Slow Scan Digital TV, in contrast to SSTV which is analog and has been there for a long time. It has been mentioned that SSDV is a packetised digital form of SSTV. I heard of SSDV first when I read about the recently launched ASRTU-1 amateur radio satellite, which has a UHF SSDV in addition to the V/U transponder and 10GHz high resolution image downlink onboard. UBSEDS24 Balloon with SSDV launched from Bristol, UK sometime back had recorded nice SSDV images of the clouds from above. Lunar-OSCAR-94 which went into lunar orbit had transmitted SSDV images back to radio amateurs on Earth. WSJT JT4G was used for messages and transmissions were on 435.400 and 436.400 MHz. Transmitting power was about 2W, using VHF/UHF SDR transceivers. It was the world's smallest spacecraft to enter lunar orbit indep...
Read more

What is a double conversion superheterodyne receiver?

Image
 We have seen that usual superheterodyne radio receivers have single conversion of received frequency to the intermediate frequency using a single local oscillator and mixer. In many of the modern communications receivers, multiple successive stages of frequency conversions with multiple intermediate frequencies are used. A receiver with two frequency conversions and two intermediate frequencies is known as a double or dual conversion superheterodyne receiver. One with three levels of conversion and three intermediate frequencies is known as a triple conversion superheterodyne receiver. Use of additional conversions improve adjacent channel selectivity and image frequency rejection. First IF stage has a wide separation between the intended signal and the image frequency, enabling RF amplifier to reject the image frequency. Second IF filter has a narrow bandwidth providing good adjacent channel selectivity. Single IF stage in conventional superheterodyne receivers is a tradeoff betw...
Read more

Have you heard of zBITX?

Image
 Well, I had not heard till I read the program schedule of LARC-7 today. Most of you would be familiar with uBITX which has gone up to version 6. Some of you would be aware of sBITX, which is quite an advance over uBITX. Almost daily I am meeting a new uBITX user on the band, most of them using additional linear amplifiers. That made me join the BITX group on groups.io , where I am getting messages from uBITX and sBITX users from all sides of the globe. Still I was not aware of zBITX and that made me look around and came across two references. One was the video of a talk by VU2ESE at QRP ARCI . Another was an email in the BITX groups.io which was citing the former. zBITX is a new transceiver from VU2ESE based on Raspberry Pi Zero for 20W, having CW skimmer and FT8 modes in addition to the regular SSB mode and waterfall display which the sBITX also has. zBITX is quite small, just 3" x 3" x 1.5" in size. It is a Raspberry Pi Zero based 20 W software defined radio which h...
Read more